|
Sprinkler Information
02/09/12
Q; How will I benefit from an inground sprinkler system?
A; Since handwatering is done on a random basis, and at irregular intervals,
an automatic sprinkler system will actually, in most cases, use less water.
It will also disperse the water at an even rate, and for a predetermined amount
of time. This allows you to water sunny and shady areas for different periods
of time, and to water when it is most efficient. One obvious benefit is the
ability to continue a watering program while you are away on vacation, etc.
Q; Will the installation make a mess of my lawn?
A; Modern installation techniques have made system installation far less disruptive
than in the past. Sprinkler Systems features trenchless pipe installation.
This is done with a purpose built machine that slices the sod, and lays the
pipe at the same time. In general, the nicer the lawn to begin with, the less
mess there is. In this case, all of the sod is still there, it may just need
to be put back and tamped. A lawn that is in disrepair will be hard to make
look good, as there is no sod to be replaced. In this situation, overseeding
and new growth will be made easier because of the sprinkler system.
Q; How long does a system take to put in?
A; It would depend on the area that is trying to be covered. An average size
lawn (@15,000 sq. ft.) can usually be done in one full day, depending on the
situation. A large country lawn can take anywhere from two to four days. On
average, we spend one to two days on a job.
Q; What type of maintenance does the system require?
A; All systems need to be winterized at the end of the season. This is done
by attaching an air hose to a fitting on the water line, and blowing all of
the water out of the system. Most people that we install systems for simply
turn it back on in the springtime themselves. We do offer the service of opening
systems for the season. The quality of the products used initially, and of the
overall installation, play an important part in the long term service of the
system. The better the products and installation, the less trouble you should
expect in the future. Sprinkler Systems uses the finest products available
in the industry, and strives to provide the finest installations in the business.
Q; What products do you use?
A; Sprinkler Systems features Hunter gear drive sprinkler heads and digital
timers, and RainBird electric valves and sprayheads. These are what we consider
to be the finest products in the industry, which is why we don't use all one
companies products. Please see our "Irrigation Products" section for
more information.
Q; What about underground wires and/or electric dog fences?
A; Sprinkler Systems owns a Dynatel 2250 cable locator. This is considered
to be the finest locator available, and is the same as the phone and cable companies
use. We have had very little trouble with underground wires since we bought
this unit.
Q; What happens when it rains?
A; Sprinkler Systems installs a rain sensor on every system we install. This
device senses rainfall, and will shut down your system when it has received
enough rain. The sensor is adjustable, so it can be set to individual needs
and preference.
Q; How long and how often should I run my sprinkler system?
A; While there are no set parameters for this, here are a few rules of thumb.
The precipitation rates on geardrive/sprayhead zones is about a 4 to 1 ratio.
This means that gear drive zones should be run @ four times longer than sprayzones.
Gear drive zones should be run for a minimum of 30 minutes, except in very shady
areas. In the hot parts of the summer, these should be changed to 45 minutes,
even an hour. Sprayhead zones should be run for 8 to 10 minutes, and bumped
up to 15 to 20 minutes in dramatically hot weather. In the spring and fall,
you should be able to get by with every second or third day. When the weather
gets very hot, once a day is a good idea, as this will keep the lawn from getting
stressed. Time and experience will tell you what will work best on your own
property. For a more detailed discussion of this, go to the "Troubleshooting"
page, and click on "Zone Run Times".
Q; What is a backflow device, and why do I need one on my sprinkler system?
A;A backflow device is generally a brass assembly that will prevent any water
from the sprinkler system from getting into the drinking water supply, and are
required by all municipalities. There are many different types of these, and
each individual municipality has differing requirements for the installation.
Sprinkler Systems is very familiar with most locales, and can provide the
appropriate backflow device for your system.
Q; What does "Head to Head" coverage mean, and can I get by without
it?
A;On any system, one of the fundamentals of design is that each head hit the
one to the left and right of it, and any other heads within its throw. This
provides even water coverage, referred to as "Matched Precipitation".
Really what you are trying to achieve is artificial rainfall. Areas with only
single coverage might fare well in cool conditions, but will be the first to
brown up in very hot weather. You are far better off to design and install the
system properly to begin with, as it is much harder and expensive after the
fact to add or move heads to compensate for dry areas. You can always run zones
with single coverage heads longer, but now you are over-watering the double/triple
coverage areas to compensate for the single coverage areas. Head to head coverage
is paramount for a lush, green lawn.
Q; Will water alone keep my lawn that deep green color?
A;While water is the key ingredient for a healthy lawn, it is not the only answer.
Fertilization is generally required for that lush green look, as is bug control.
We get calls a lot in the summer from people that think there is something wrong
with their sprinkler system, but upon inspection, there are bugs destroying
the lawn, or they have not used any fertilizer. If you are unfamiliar with fertilizer
and pesticides, we recommend that you contact a company in that business to
look after your lawn. Having a sprinkler system installed is the first step
towards a healthy, green lawn, but it is not the only step.
Q; What is the difference between gear drive heads, and sprayheads?
A; Gear drive heads have a water powered motor that makes the upper part of
the head rotate. These heads are used for large turf areas, with throws of 15
to 35 feet. They are adjustable not only in the precipitation rate, but the
arc as well. Sprinkler Systems uses only Hunter gear drive heads, which are
easily changed from 40 degrees, to a full 360 degree rotation. Sprayheads are
generally used for smaller or oddly shaped turf areas. Some companies still
use them in flower and plant beds, but we prefer to use drip irrigation in these.
Sprayheads have no moving parts, and emit a spray of a particular pattern. The
nozzles are interchangeable, and come in circular, rectangular, and square patterns,
with throws of four to fifteen feet. The precipitation rates of these two types
of heads are dramatically different, and should never be mixed on the same zone.
Q; What is drip irrigation, and can I benefit from it?
A; Drip irrigation is a method where small amounts of water are placed directly
on the root ball of plants, therefore using the water more efficiently. This
is done with a network of small tubing that is all tied together, and provides
water to many plants at once. A drip zone will usually run for several hours,
not twenty or thirty minutes. It is generally considered to be better for most
planting beds than topical watering, and also more water conservative. Your
particular situation would dictate whether it was right for you.
Q; Why should I choose Sprinkler Systems to install my system?
A; Sprinkler Systems has a reputation for doing the best work in the business.
We pay attention to the small details, and take great pride in each and every
system we install. At Sprinkler Systems quality is our standard, not our goal.
We generally only service our own systems, allowing us to take better care of
our primary customers. Owner Dave Eilenberger is backed by 15 years in the irrigation
business, and has an extensive background in the well and water pump fields.
Sprinkler Systems is a licensed NH pump installer, and can take care of any
and all irrigation needs that you have.
|
Fire Sprinkler System Components - APi Fire Protection Group
... Fire Sprinkler System Components ... fire sprinkler system are the sprinklers, system piping and a dependable water source. Most systems also require an alarm and system control valves ...
www.FPSIUSA.com
... Sprinkler Heads, Valves and Related Equipment for Wet and Dry Sprinkler and ... Sprinkler Heads, Valves and Related Equipment for Wet Sprinkler and Deluge Systems. Fire Alarm, Smoke and ...
Alarm Valves Page -- [Starfire, Inc.]
Starfire, Inc. is a distributor of fire protection materials, with locations in Wisconsin and California. We serve fire protection and plumbing contractors, facility maintenance personnel and engineers throughout the United States and the entire ...
Fire Sprinkler Systems > Fire Protection Equipment > Lichfield Fire & Safety Equipment
Fire Sprinkler Systems from LIFECO, specialists in Fire Sprinkler Systems and fire safety products, fire systems. Choose Fire Sprinkler Systems from LIFECO to suit your needs. ... of sprinkler heads (standard and quick response, and concealed products), alarm valves, pre-action valves ...
FPSI Fire Protection Systems, Inc.
... Foam Proportioner. Sprinkler Heads, Valves and. Related Equipment for Wet ... Sprinkler Heads, Valves and. Related Equipment for Wet. Sprinkler and Deluge. Systems. Fire Alarm, Smoke and Heat ...
Capital Partners Development Company
... FIRE SPRINKLER ALARM VALVE -- Fire sprinkler alarm valves are ... Most fire sprinkler alarm valves also have the capability to initiate mechanical alarms. These alarm valves are ...
Guardian Automatic Sprinkler Co., Inc. -- Products
home > products. Guardian Supply Division. At Guardian, you can find a wide selection of many quality fire protection products. ... need to install your client's fire sprinkler system. We provide: Fire Sprinklers. Fire Sprinkler Accessories. Pretrimmed Wet Alarm Valves ...
Waterworks Supplies, Fire Sprinkler Supplies, Water Meters, Backflow Preventers, Pipe, Valves, Fittings, Plumbing...
The online source for fire sprinkler systems, backflow preventers and water meters ... Fire Sprinkler Heads, Check Valves, Fire Sprinkler Valves, Alarm Valves, Controls, Butterball Valves, OS&Y Gate Valves ... All Major Brands of Fire Sprinkler Equipment Carried in Stock ...
New Page 1
INSPECTIONS - Page 5. Sprinkler System Maintenance and Inspection. Fire sprinkler systems are required to be inspected in accordance with NFPA 25. ... in accordance with applicable NFPA codes. Our fire alarm and sprinkler technician teams can save you time and ... 9-4.1.1. Alarm valves shall be externally inspected monthly. ...
Publication Details - AS 4118.1.2-1996 Fire sprinkler systems - Components - Alarm valves (wet)
... AS 4118.1.2-1996 : Fire sprinkler systems - Components - Alarm valves (wet ... requirements for the construction and performance of alarm valves (wet), for fire sprinkler systems. ...
Wet Alarm Valves (for sprinkler systems) - Fire Fighting and Safety Equipment to Buy Online - Life Tech (UK) Ltd
Home · Log In · Register With Us. Wet Alarm Valve. Product Description ... UK) Ltd Wet Alarm Valves are designed to ... sprinkler systems, foam system, fire alarm equipment, emergency lights, fire hoses, fire blankets, dry riser equipment, fire pumps, valves ...
::: Hidromon Engenharia LTDA :::
... Set of dry valves with nitrogen to Protection by Sprinklers ... of the Sprinkler System, Pump Room, Govern Valves - Hydrant Network, Fire Extinguishers, Fire-Alarm and Emergency ...
Welcome to Fire Sprinkler Supply, LLC
search. Products: Sprinkler Devices. Sprinkler Devices. We offer the following Fire Protection Sprinkler Devices: Sprinkler heads. Alarm Valves. Dry Valves. Deluge Valves. Riser Check Valves. Retard Chambers. Accelerators
Publication Details - AS 4118.1.7-1996 Fire sprinkler systems - Components - Alarm valves (dry)
... AS 4118.1.7-1996 : Fire sprinkler systems - Components - Alarm valves (dry ... requirements for the construction and performance of alarm valves (dry) for fire sprinkler systems. ...
FP-004 - Current Publications
... AS 4118.1.2-1996. Fire sprinkler systems - Components - Alarm valves (wet) ... AS 4118.1.7-1996. Fire sprinkler systems - Components - Alarm valves (dry) ...
Wet Alarm Check Valve > Fire Sprinkler Systems > Lichfield Fire & Safety Equipment
Wet Alarm Check Valve from LIFECO, specialists in Fire Sprinkler Systems and fire safety products, fire systems. Choose Fire Sprinkler Systems from LIFECO to suit your needs. ... Lifeco Wet Alarm Valves are designed to hold back water pressure in the piping system until the ...
Sprinkler Heads auction items from eBay Business & Industrial
Join eBay Business & Industrial auctions and buy or sell Sprinkler Heads auction items. eBay Category: Business & Industrial > Industrial Supply & MRO > Safety & Security > Industrial Fire Protection > Sprinkler Heads : Sprinkler Heads
Untitled Document
... An automatic sprinkler system consists of pipes and heat operated valves (sprinkler 'heads') by means of which a fire is automatically detected, the alarm given and ...
Central Fire Protection District
Your browser does not support script. FPD-81. PLAN CHECK REQUIREMENTS FOR COMMERCIAL AUTOMATIC FIRE SPRINKLER SYSTEMS. GENERAL: ... Fire Alarm System Requirements (FPB-56). All valves controlling the water supply for automatic sprinkler systems ...
Release Control Fire Alarm Systems
... Fire Alarm Systems ... Fire Alarm Systems. for Automatic Release of Deluge and Preaction. Sprinkler Systems require operation of specific. compatible FM Approved Automatic Water Control. Valves ...
NOTE: Please contact us right away
if you'd like to make any changes to your listing.
|